Waterproofing Chemical
We are a leading Wholesale Trader of kemperol v210 waterproofing, hydroproof xtra waterproofing chemicals, 15kg fosroc renderoc plug, 5kg fosroc renderoc plug, fosroc brush bond waterproofing chemical and 25kg ns 50 arm grout arment from Pune, India.
Kemperol V210 Waterproofing
Request Callback
₹ 780 / Kg Get Latest Price
Product Brochure
| Grade Standard | Analytical Grade |
| Brand | Kemperol |
| Usage/Application | Waterproofing |
| Packaging Size | 20kg |
| Packaging Type | Bucket |
| Category | Waterproofing Coating |
| Material | Kemperol V210 |
| Shelf Life | 12 Month |
| Form of Chemical | Solid |
| Physical form | Liquid |
Minimum order quantity: 20 Kg
Only suitable for outdoor use• in conjunction with KEMPEROL®fleece• For application of larger areas• For application under green roofs• For new buildings and repair work• Can be applied to practically any substrate
Hydroproof Xtra Waterproofing Chemicals
Request Callback
₹ 162 / Kg Get Latest Price
Product Brochure
| Form | Liquid |
| Brand | Fosroc |
| Usage/Application | Construction |
| Color | White Crystal |
| Form Of Chemical | Liquid |
| Type | Waterproofing Compound |
| Material | Acrylic polymers |
Minimum order quantity: 10 Kg
Hydroproof Xtra
Single component acrylic polymer for cementbased waterproof composite coatingmembrane
UsesProvides an effective and economical method of waterproofingto concrete and masonry surfaces, by mixing with cement andapplication by brush.Advantages??? Non - toxic, non-flammable and user friendly??? Provides a tough, impermeable waterproof membrane??? Can be applied by brush, on horizontal and vertical surfaces??? Excellent adhesion to concrete and masonry surfaces??? Protects concrete and mortar from natural elements suchas wind, rain, sunlight??? Breathable - allows inside water vapour to escapeDescriptionHydroproof Xtra is formulated to be mixed with cement on siteor simply brush applied over concrete or masonry surfaces toprovide an effective waterproof membrane.Technical supportFosroc provides a technical advisory service supported by ateam of specialists in the field.Areas of applicationBelow sloping screed or waterproof plaster on :??? Roofs, terraces and balconies as a sandwich layer??? Pools and fountains??? Reservoirs and channels??? End walls subjected to rainPropertiesWater absorption : 1% maximumPot life at 300C : 30 min.Application temperature : Not less than 100CToxicity : Non-toxicBond strength to concrete : Approx. 1 N/mm2Application instructionsPreparationAll surfaces to be treated with Hydroproof Xtra must be thoroughlycleaned by a wire brush or other mechanical means, toremove all dust, laitence or debris. The surface must also befree from oil, grease, wax or any other form of foreign matterwhich might affect adhesion. Spalled and deeply disintegratedconcrete or mortar must be removed to a sound substrate andrepaired suitably before coating.Hydroproof XtraPrimingBefore application, the surface should be primed with HydroproofXtra as follows:1 part of Hydroproof Xtra : 2 parts of Water : 4 parts of CementMixed material with the above proportion will cover an area of16-17m2 for 1L of Hydroproof Xtra.TopcoatHydroproof Xtra acrylic polymer shall be mixed with neat cementin the ratio of 1:2 respectively, to obtain a uniform andconsistent slurry avoiding any lump formation. This can beachieved with a low duty, low speed drilling machine attachedwith a mixing paddle. Do not mix for more than 2 minutes. Donot mix more material than which can be used within the potlife. Retempering the mix with water should not be done. Occassionallystirr the material till the entire quantity is applied, sothat solids do not settle at the bottom of the container.Mixing RatioHydroproof Xtra liquid Neat cement0.5L 1 kg1L 2kg5L 10 kg20L 40 kgFor white colour - mix white cement, for other colours, addcement compatible pigments to white cement.ApplicationFor best results, wet the surface before coating. Apply the mixwith a short, stiff bristle brush like a paint to an approximatethickness of 1 to 2mm. During the first 12 hours of curing,Hydroproof Xtra surface must be protected from abrasion, rainor other adverse conditions. No traffic shall be allowed within48 hours after application.Normally 2 coats of application of Hydroproof Xtra are recommended.First coat should be allowed to air dry for 5 - 6 hours.After application of the final coat, initial air drying shall be allowedfor 2 to 6 hours. During this period water should not beused for curing. Moist curing should be done for the next 24hours by spraying water on Hydroproof Xtra coating. Followingmoist curing, Hydroproof Xtra should be allowed to dry for threedays before subjecting it to submersion in water
Single component acrylic polymer for cementbased waterproof composite coatingmembrane
UsesProvides an effective and economical method of waterproofingto concrete and masonry surfaces, by mixing with cement andapplication by brush.Advantages??? Non - toxic, non-flammable and user friendly??? Provides a tough, impermeable waterproof membrane??? Can be applied by brush, on horizontal and vertical surfaces??? Excellent adhesion to concrete and masonry surfaces??? Protects concrete and mortar from natural elements suchas wind, rain, sunlight??? Breathable - allows inside water vapour to escapeDescriptionHydroproof Xtra is formulated to be mixed with cement on siteor simply brush applied over concrete or masonry surfaces toprovide an effective waterproof membrane.Technical supportFosroc provides a technical advisory service supported by ateam of specialists in the field.Areas of applicationBelow sloping screed or waterproof plaster on :??? Roofs, terraces and balconies as a sandwich layer??? Pools and fountains??? Reservoirs and channels??? End walls subjected to rainPropertiesWater absorption : 1% maximumPot life at 300C : 30 min.Application temperature : Not less than 100CToxicity : Non-toxicBond strength to concrete : Approx. 1 N/mm2Application instructionsPreparationAll surfaces to be treated with Hydroproof Xtra must be thoroughlycleaned by a wire brush or other mechanical means, toremove all dust, laitence or debris. The surface must also befree from oil, grease, wax or any other form of foreign matterwhich might affect adhesion. Spalled and deeply disintegratedconcrete or mortar must be removed to a sound substrate andrepaired suitably before coating.Hydroproof XtraPrimingBefore application, the surface should be primed with HydroproofXtra as follows:1 part of Hydroproof Xtra : 2 parts of Water : 4 parts of CementMixed material with the above proportion will cover an area of16-17m2 for 1L of Hydroproof Xtra.TopcoatHydroproof Xtra acrylic polymer shall be mixed with neat cementin the ratio of 1:2 respectively, to obtain a uniform andconsistent slurry avoiding any lump formation. This can beachieved with a low duty, low speed drilling machine attachedwith a mixing paddle. Do not mix for more than 2 minutes. Donot mix more material than which can be used within the potlife. Retempering the mix with water should not be done. Occassionallystirr the material till the entire quantity is applied, sothat solids do not settle at the bottom of the container.Mixing RatioHydroproof Xtra liquid Neat cement0.5L 1 kg1L 2kg5L 10 kg20L 40 kgFor white colour - mix white cement, for other colours, addcement compatible pigments to white cement.ApplicationFor best results, wet the surface before coating. Apply the mixwith a short, stiff bristle brush like a paint to an approximatethickness of 1 to 2mm. During the first 12 hours of curing,Hydroproof Xtra surface must be protected from abrasion, rainor other adverse conditions. No traffic shall be allowed within48 hours after application.Normally 2 coats of application of Hydroproof Xtra are recommended.First coat should be allowed to air dry for 5 - 6 hours.After application of the final coat, initial air drying shall be allowedfor 2 to 6 hours. During this period water should not beused for curing. Moist curing should be done for the next 24hours by spraying water on Hydroproof Xtra coating. Followingmoist curing, Hydroproof Xtra should be allowed to dry for threedays before subjecting it to submersion in water
15kg Fosroc Renderoc Plug
Request Callback
₹ 350 / Bag Get Latest Price
Product Brochure
| Form of Chemicals | Granules |
| Brand | Fosroc |
| Usage/Application | Rapid setting cement based, water leak plugging mortar |
| Packaging Size | 15Kg |
| Category | Waterproofing Coating, Injection Grouting |
| Color | Grey |
| Form of Chemical | Solid |
| Grade Standard | Technical Grade |
| Physical State | Powder |
| Usage | Laboratory |
Minimum order quantity: 05 Bag
Rapid setting cement based, water leak
plugging mortar
Uses
For the rapid temporary patching and plugging of concrete
segments, concrete and brick tunnel linings, sewage systems,
below ground access chambers, pipes, basements, foundations
and mines.
Advantages
Emergency water - stopping capability
Single component - only the addition of clean water is
required.
Excellent bond to the substrate
Low exotherm minimises thermal cracking
Pre-packed formulation to overcome variation in site batching
Contains no chloride admixtures.
Description
Renderoc Plug is supplied as a ready to use blend of dry powders
which requires only the addition of clean water at site to
produce a highly consistent, rapid setting mortar which is easy
to apply in many diffi cult conditions. The material is based
on a blend of cements, graded aggregates, special fi llers and
chemical additives which control the rate of set and minimise
the risk of thermal cracking.
5kg Fosroc Renderoc Plug
Request Callback
₹ 150 / Kg Get Latest Price
| Form | Powder |
| Usage/Application | Rapid Setting cement based water leak plugging mortar |
| Packaging Size | 5Kg |
| Packaging Type | Packet |
| Shelf Life | 6 month |
| Brand | Fosroc |
Fosroc Brush Bond Waterproofing Chemical
Request Callback
₹ 1650 / Pack Get Latest Price
Product Brochure
| Usage/Application | acrylic polymer modified elastomeric waterproofing membrane |
| Packaging Size | 23kg+4L |
| Brand | Fosroc |
| Category | Cementitious Waterproofing |
| Coverage | 16-18Sqm/Pack |
| Type | Acrylic polymer modified elastomeric |
| Color | Grey |
| State of Matter | Two Components Polymer+Powder, Solid |
| Material | Acrylic polymer modified |
| Grade Standard | Protective coating |
Brushbond
Acrylic polymer modified elastomeric waterproofing membrane coating for concrete and masonry surfaces
Uses Brushbond provides a seamless, waterproof coating suitable for use in water tanks, reservoirs, swimming pools, roofs and to ensure water tightness. Brushbond effectively protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases. Brushbond is designed to re-face and even out variations in concrete and masonry surfaces. Brushbond effectively seals concrete masonry walls and bridges the shrinkage cracks which are static. Brushbond provides a tough and durable coating which cannot be easily damaged or worn away. Advantages „ Minimum surface preparation needed - Low labour costs. „ Applied directly to the damp concrete and masonry „ Excellent adhesion - Bonds to porous and nonporous surfaces. „ Non-toxic-ideal for potable water tanks „ Waterproof - Excellent for damp-proofing basements „ Breathable-allows transmission of water vapour from interior of building „ Excellent for concrete roof, leaking brick and masonry walls „ Good resistance to Carbon dioxide and Chloride ion diffusion
25Kg NS 50 Arm Grout Arment
Request Callback
₹ 385 / Kg Get Latest Price
| Usage/Application | Construction |
| Pack Size | 25Kg |
| Pack Type | Bag |
| Colour | Grey |
| Form | Powder |
| Brand | MYK Arment |
Fosroc Nitocote Cm210 Waterproofing Chemical
Request Callback
₹ 1400 / Pack Get Latest Price
Product Brochure
| Type | Elastomeric cementitious coating |
| Coverage Area | 6-7Sqm /Pack |
| Packaging Size | 23 Kg |
| Packaging Type | Plastic Can+ HDPE Bag |
| Coverage | 6-7Sqm /Pack |
| Brand | Fosroc |
| Color | Grey |
| Paint Base Type | Water Based |
Minimum order quantity: 10 Pack
Nitocote CM210
Elastomeric cementitious coating.UsesNitocote CM210 provides a cementitious, elastomeric coatingwith inherent crack-bridging ability. Typical applications include Potable water retaining structures Potable water excluding structures Internal basement waterproofi ng Drainage culverts Podium slabs Wet areas: Kitchens, bathrooms, shower rooms Foundations in contact with ground water under salineconditions.Advantages Withstands high positive and negative hydrostatic pressures Excellent crack accommodation before and after immersion Approved for use in contact with potable water Excellent bond to concrete and masonary Long working life Easy application by brush, trowel or spray Bonds to green or damp concreteStandards complianceNitocote CM210 complies with:BS 6920: 1990 Effect on Water Quality.Water Byelaws Scheme approved, product listingNo. 0510522DIN 1048: Water Penetration Test.Fire Tested to BS 476: 1987 Parts 6 and 7.UK potable water approvalsIn the case of contracts requiring Water Byelaws Schemecertifi cation, Nitocote CM210 should be applied as perthe datasheet. The product must be allowed to cure for aminimum of 7 days at 7oC or greater. Tanks with a surfacearea less than 250m2 should be fl ushed with water prior tofi lling. The tank should be disinfected in accordance withlocal regulations before re-connection to the public watersupply.DescriptionNitocote CM210 two-component polymer modifi ed cementitiouscoating is supplied in pre-packaged form. The productis designed to be easily mixed on site using a slow speed drillfi tted with a mixing paddle and then applied to the substrateusing a trowel for best results.Nitocote CM210, available in grey and white, cures to form anelastomeric impermeable membrane.Specifi cationThe waterproofi ng coating shall be Nitocote CM210, an elastomericcementitious coating approved under the UK WBS(WRc Listed) Scheme No. 0510522. The cured coating, afterimmersion, shall be capable of withstandingcracked substrate cyclic movement from 0 - 300 - 0 microns at15°C for 6,000 cycles without failure. It shall have the capabilityto resist a positive water pressure of 5 bar and a negative waterpressure of 2 bar when tested to ITM / FTM-181.PropertiesTypical properties of mixed materialPot life at 20°C : 2 hoursPot life at 35°C : 1 hourColour : Grey or whiteMixed density : 1950 kg/m3Minimum application temperature : 5°CProperties of cured coating (21 days cure at 23°C, followedby 28 days immersion at 23°C).The values obtained are for Nitocote CM210 when applied intwo coats each of 1 mm wet fi lm thicknessResistance to positive : 5 barwater pressure (DIN 1048)Pt 5 (50 m head of water)Resistance to negative : 2 barwater pressure (ITM / FTM-181) (30 m head of water)Static crack accommodation : 0.9 mm
Elastomeric cementitious coating.UsesNitocote CM210 provides a cementitious, elastomeric coatingwith inherent crack-bridging ability. Typical applications include Potable water retaining structures Potable water excluding structures Internal basement waterproofi ng Drainage culverts Podium slabs Wet areas: Kitchens, bathrooms, shower rooms Foundations in contact with ground water under salineconditions.Advantages Withstands high positive and negative hydrostatic pressures Excellent crack accommodation before and after immersion Approved for use in contact with potable water Excellent bond to concrete and masonary Long working life Easy application by brush, trowel or spray Bonds to green or damp concreteStandards complianceNitocote CM210 complies with:BS 6920: 1990 Effect on Water Quality.Water Byelaws Scheme approved, product listingNo. 0510522DIN 1048: Water Penetration Test.Fire Tested to BS 476: 1987 Parts 6 and 7.UK potable water approvalsIn the case of contracts requiring Water Byelaws Schemecertifi cation, Nitocote CM210 should be applied as perthe datasheet. The product must be allowed to cure for aminimum of 7 days at 7oC or greater. Tanks with a surfacearea less than 250m2 should be fl ushed with water prior tofi lling. The tank should be disinfected in accordance withlocal regulations before re-connection to the public watersupply.DescriptionNitocote CM210 two-component polymer modifi ed cementitiouscoating is supplied in pre-packaged form. The productis designed to be easily mixed on site using a slow speed drillfi tted with a mixing paddle and then applied to the substrateusing a trowel for best results.Nitocote CM210, available in grey and white, cures to form anelastomeric impermeable membrane.Specifi cationThe waterproofi ng coating shall be Nitocote CM210, an elastomericcementitious coating approved under the UK WBS(WRc Listed) Scheme No. 0510522. The cured coating, afterimmersion, shall be capable of withstandingcracked substrate cyclic movement from 0 - 300 - 0 microns at15°C for 6,000 cycles without failure. It shall have the capabilityto resist a positive water pressure of 5 bar and a negative waterpressure of 2 bar when tested to ITM / FTM-181.PropertiesTypical properties of mixed materialPot life at 20°C : 2 hoursPot life at 35°C : 1 hourColour : Grey or whiteMixed density : 1950 kg/m3Minimum application temperature : 5°CProperties of cured coating (21 days cure at 23°C, followedby 28 days immersion at 23°C).The values obtained are for Nitocote CM210 when applied intwo coats each of 1 mm wet fi lm thicknessResistance to positive : 5 barwater pressure (DIN 1048)Pt 5 (50 m head of water)Resistance to negative : 2 barwater pressure (ITM / FTM-181) (30 m head of water)Static crack accommodation : 0.9 mm
Fosroc Brushcrete Waterproofing Chemicals
Request Callback
₹ 3200 / Kg Get Latest Price
Product Brochure
| Brand | Fosroc |
| Packaging Size | 50Lit |
| Usage/Application | Acrylic Polymer cementitious waterproofing coating |
| Grade Standard | Acrylic Ploymemer |
| Packaging Type | Plastic Drum |
| Density | 2.1-2.2 g/cc. |
Minimum order quantity: 10 Kg
Brushcrete
Acrylic Polymer for concrete & masonryUsesBrushcrete polymer in conjunction with cement provides aseamless waterproof coating to concrete and masonry surfaces.It can be used as a waterproof or protective coating.Advantages Can be applied in uniform thickness to horizontal andvertical surfaces Develops excellent bond to most building materials Improves mechanical & physical properties of thecoating system when used in conjunction with cement Reduces or prevents salt penetration into concrete Resistance to ultraviolet light or by chemicals rangingfrom mild acids to strong alkalies Is highly impermeable in continuous wet condition Is non-fl ammable and does not give off toxic gases,when exposed to fi re Non toxicDescriptionBrushcrete is a single component acrylic based polymer whenblended with cement forms a composite polymer modifi edcementitious waterproofi ng system, when used in conjunctionwith fi bre mesh forms a tough hard wearing surface.Technical SupportThe company provides a technical advisory service supportedby a team of specialists in the fi eld.PropertiesPot life : 20-30 min. at 30oCMixed Density of : 2.1-2.2 g/cc.brushcrete toppingColour : White liquidApplication temperature : > 10oC <35oCBond strength with concrete : > 1N/mm2Areas of Application Waterproofi ng of toilets, terraces, water retaining structures General cementitious renderBrushcreteApplication InstructionsSurface PreparationPrior to application of Brushcrete, surface must be preparedas mentioned below to avoid failure :The surface shall be cleaned to remove all dust, foreign matters,loose materials or any deposits of contmination which couldaffect the bond between the surface and the coatingThis canbe done by scarifying, grinding, water blasting, sand blasting,acid washing or by any other approved method.New fl at surface like sub-base concrete shall be made reasonablysmooth so as not to impede the application of Brushcrete coatingand to avoid sharp projections.All concrete surfaces shall be thoroughly pre-wetted for atleast one hour prior to the application of Brushcrete coating bypouring water on fl at surface or by vigorously spraying wateron vertical/inclined surfaces. Ensure that surface is only dampduring application of Brushcrete coating.. In no case thereshould be standing water or a shiny wet surface.Depressions are fi lled and leveled using Brushcrete. For fi lling,the mixing ratio is 1 kg cement:1.5 by silica sand and 0.5 kgBrushcrete.MixingBrushcrete Polymer is mixed with neat cement in the ratio of100 kg cement:50 kg of Brushcrete. The mix has to be stirredthoroughly until no air bubbles remain in the mix. Any lumpfound in the mix should be removed.ApplicationThe mix has to be applied by brush on rendered sound preparedsurface. Two or more coats are recommended. First coat shouldbe allowed to dry for 5-6 hours. The surface should be madewet before application in case of porous substrates.equipment immediately after use with clean water. Hardenedmaterial can be removed mechanically.CuringDuring the fi rst 12 hours of curing, it must be protected fromabrasion, rain and other adverse conditions. No traffi c shall beallowed on a Brushcrete treated surface within 48 hours afterapplication. After application of fi nal coat of Brushcrete, initialair drying shall be done for 2-6 hours. During this period no
Acrylic Polymer for concrete & masonryUsesBrushcrete polymer in conjunction with cement provides aseamless waterproof coating to concrete and masonry surfaces.It can be used as a waterproof or protective coating.Advantages Can be applied in uniform thickness to horizontal andvertical surfaces Develops excellent bond to most building materials Improves mechanical & physical properties of thecoating system when used in conjunction with cement Reduces or prevents salt penetration into concrete Resistance to ultraviolet light or by chemicals rangingfrom mild acids to strong alkalies Is highly impermeable in continuous wet condition Is non-fl ammable and does not give off toxic gases,when exposed to fi re Non toxicDescriptionBrushcrete is a single component acrylic based polymer whenblended with cement forms a composite polymer modifi edcementitious waterproofi ng system, when used in conjunctionwith fi bre mesh forms a tough hard wearing surface.Technical SupportThe company provides a technical advisory service supportedby a team of specialists in the fi eld.PropertiesPot life : 20-30 min. at 30oCMixed Density of : 2.1-2.2 g/cc.brushcrete toppingColour : White liquidApplication temperature : > 10oC <35oCBond strength with concrete : > 1N/mm2Areas of Application Waterproofi ng of toilets, terraces, water retaining structures General cementitious renderBrushcreteApplication InstructionsSurface PreparationPrior to application of Brushcrete, surface must be preparedas mentioned below to avoid failure :The surface shall be cleaned to remove all dust, foreign matters,loose materials or any deposits of contmination which couldaffect the bond between the surface and the coatingThis canbe done by scarifying, grinding, water blasting, sand blasting,acid washing or by any other approved method.New fl at surface like sub-base concrete shall be made reasonablysmooth so as not to impede the application of Brushcrete coatingand to avoid sharp projections.All concrete surfaces shall be thoroughly pre-wetted for atleast one hour prior to the application of Brushcrete coating bypouring water on fl at surface or by vigorously spraying wateron vertical/inclined surfaces. Ensure that surface is only dampduring application of Brushcrete coating.. In no case thereshould be standing water or a shiny wet surface.Depressions are fi lled and leveled using Brushcrete. For fi lling,the mixing ratio is 1 kg cement:1.5 by silica sand and 0.5 kgBrushcrete.MixingBrushcrete Polymer is mixed with neat cement in the ratio of100 kg cement:50 kg of Brushcrete. The mix has to be stirredthoroughly until no air bubbles remain in the mix. Any lumpfound in the mix should be removed.ApplicationThe mix has to be applied by brush on rendered sound preparedsurface. Two or more coats are recommended. First coat shouldbe allowed to dry for 5-6 hours. The surface should be madewet before application in case of porous substrates.equipment immediately after use with clean water. Hardenedmaterial can be removed mechanically.CuringDuring the fi rst 12 hours of curing, it must be protected fromabrasion, rain and other adverse conditions. No traffi c shall beallowed on a Brushcrete treated surface within 48 hours afterapplication. After application of fi nal coat of Brushcrete, initialair drying shall be done for 2-6 hours. During this period no
20L Nitobond SBR Latex
Request Callback
₹ 1090 / Litre Get Latest Price
Product Brochure
| Brand | Fosroc |
| Packaging Size | 5Lit X 02 pack Per Box |
| Usage/Application | Bonding Agent/Screed modifier |
| Packaging Type | 5lit Plastic drum |
| Form | Liquid |
| Surface Of Application | Concrete & Masonary |
| Application Industry | Construction |
Nitobond SBR(Latex)
Mortar and Screed modifier cum bonding aidUsesFor modifying and improving bonding of floor toppings,renderings and mortars; repair of worn, damaged and spalledconcrete, repair of large cracks; polymer modified floorscreeds; waterproof plasters for masonary and slurries.Advantages Simple to use - Single component, gauged as required High - Provides excellent bond to concrete, adhesionplaster, masonry, stone work, etc Improves -Gives weather resistant mortar with improveddurability impermeability to chlorides and other harmfulagents Reduces - Provides waterproof screeds, plasters andPermeability slurries Increases - Improved tensile and flexural propertiesstrength allow thin applications Versatile - Compatible with all common hydraulic cements Cost effective - Nitobond SBR (Latex) is economical touseDescriptionNitobond SBR(Latex) is modified styrene butadiene emulsionspecially designed for use as a bonding aid and gauging liquidfor cementitious systems. It is resistant to hydrolysis and cantherefore be used for external applications too.Technical SupportFosroc provides a technical advisory service supported by ateam of specialists in the field.PropertiesTypical mechanical properties of 1 : 3 cement sand mortar atW/C - 0.45 for control and W/C - 0.35 for mortar containingNitobond SBR (Latex) ( 5 lites / 50 kg cement ). Tested inaccordance with BS 6319 & wet cured.Mechanical properties Control Nitobond SBR (Latex)Compressive strength (N/mm2)3 days 11.5 12.57 days 13.0 14.528 days 22.0 24.0Tensile strength(N/mm2) @ 28 days 2.5 3.5Flexural strength(N/mm2) @ 28 days 5.0 6.5Note : Increased dosages of Nitobond SBR (Latex) andfurther water reduction leads to improved mechanicalproperties.Chemical resistance :Cementitious based materials have limited chemicalresitance. The addition of Nitobond SBR (Latex) to cementmortars reduces permeability and therefore helps reduce therate of attack by aggressive chemicals.Application instructionsSurface Preparation:The object of the surface preparation is to achieve a cleansound surface with a good mechanical key. All substratesshould be cleaned and free of dust, plaster, oil, paint, grease,corrosion deposits, and any other deleterious substances.Laitence should be removed by mechanical means. Smoothsubstrates must be mechanically roughened e.g. byscabbling, needle gun or grit blasting to provide an adequatekey.Corroded reinforcing steel should be exposed around its fullcircumference and cleaned to remove all loose scale andcorrosion deposits. It is always preferably to clean the steelto a bright condition. Use of emery cloth, grit or sand blastingis recommended.PrimingReinforcing steel must be primed with Nitozinc Primerimmediately after cleaning. The concrete substrate should bethoroughly dampened with water and any excess removedbefore being primed by thoroughly scrubbing in a slurry coat of1 volume Nitbond SBR (Latex) to 1 volume water to 3 volumesfresh cement.In order to obtain a smooth consistency the cement shouldbe blended slowly into the liquids. Stir frequently during useto offset settlement.
Mortar and Screed modifier cum bonding aidUsesFor modifying and improving bonding of floor toppings,renderings and mortars; repair of worn, damaged and spalledconcrete, repair of large cracks; polymer modified floorscreeds; waterproof plasters for masonary and slurries.Advantages Simple to use - Single component, gauged as required High - Provides excellent bond to concrete, adhesionplaster, masonry, stone work, etc Improves -Gives weather resistant mortar with improveddurability impermeability to chlorides and other harmfulagents Reduces - Provides waterproof screeds, plasters andPermeability slurries Increases - Improved tensile and flexural propertiesstrength allow thin applications Versatile - Compatible with all common hydraulic cements Cost effective - Nitobond SBR (Latex) is economical touseDescriptionNitobond SBR(Latex) is modified styrene butadiene emulsionspecially designed for use as a bonding aid and gauging liquidfor cementitious systems. It is resistant to hydrolysis and cantherefore be used for external applications too.Technical SupportFosroc provides a technical advisory service supported by ateam of specialists in the field.PropertiesTypical mechanical properties of 1 : 3 cement sand mortar atW/C - 0.45 for control and W/C - 0.35 for mortar containingNitobond SBR (Latex) ( 5 lites / 50 kg cement ). Tested inaccordance with BS 6319 & wet cured.Mechanical properties Control Nitobond SBR (Latex)Compressive strength (N/mm2)3 days 11.5 12.57 days 13.0 14.528 days 22.0 24.0Tensile strength(N/mm2) @ 28 days 2.5 3.5Flexural strength(N/mm2) @ 28 days 5.0 6.5Note : Increased dosages of Nitobond SBR (Latex) andfurther water reduction leads to improved mechanicalproperties.Chemical resistance :Cementitious based materials have limited chemicalresitance. The addition of Nitobond SBR (Latex) to cementmortars reduces permeability and therefore helps reduce therate of attack by aggressive chemicals.Application instructionsSurface Preparation:The object of the surface preparation is to achieve a cleansound surface with a good mechanical key. All substratesshould be cleaned and free of dust, plaster, oil, paint, grease,corrosion deposits, and any other deleterious substances.Laitence should be removed by mechanical means. Smoothsubstrates must be mechanically roughened e.g. byscabbling, needle gun or grit blasting to provide an adequatekey.Corroded reinforcing steel should be exposed around its fullcircumference and cleaned to remove all loose scale andcorrosion deposits. It is always preferably to clean the steelto a bright condition. Use of emery cloth, grit or sand blastingis recommended.PrimingReinforcing steel must be primed with Nitozinc Primerimmediately after cleaning. The concrete substrate should bethoroughly dampened with water and any excess removedbefore being primed by thoroughly scrubbing in a slurry coat of1 volume Nitbond SBR (Latex) to 1 volume water to 3 volumesfresh cement.In order to obtain a smooth consistency the cement shouldbe blended slowly into the liquids. Stir frequently during useto offset settlement.
Dr Fixit 112 Pidifin 2K Waterproofing Chemical
Request Callback
₹ 75 / Kg Get Latest Price
Product Brochure
| Usage/Application | Waterproofing |
| Packaging Size | 30 Kg |
| Category | Cementitious Waterproofing |
| Color | Grey |
| Coverage | 20 - 22 sq ft/kg for two coats |
| Brand | Dr Fixit |
| Form Of Chemical | Liquid and Powder |
Minimum order quantity: 900 Kg
Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs. Waterproofing of toilets & bathrooms, small terraces etc. It bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.
Fosroc Thioflex 600 Sealant
Request Callback
₹ 270 / Kg Get Latest Price
Product Brochure
| Packaging Size | 6.5 Kg |
| Brand | Fosroc |
| Packaging Type | Bucket |
| Application Industry | Jointing |
| Polysulphide Sealant | Gun Grade and Pure Grade |
| Surface Of Application | Construction Joint |
Minimum order quantity: 52 Kg
Thiofl ex 600 is a two part sealant based on a liquid polysulphidepolymer. This is available in two grades Gun gradeand Pourable grade. Thiofl ex 600 PG is a Pourable versiondesigned for use in horizontal joints. Adhesion is excellent tomost common building substrates. The product is particularlyrecommended for sealing horizontal structural expansion jointsin most civil engineering structures like building superstructures,subways, basements, fl oors and reservoirs.
Nerolac Perma DPS Waterproofing Chemical
Request Callback
₹ 250 / Kg Get Latest Price
Product Brochure
| Brand | Perma Chemicals |
| Packaging Size | 25 Kg |
| Color | Transparent |
| Form of Chemical | Liquid |
| Category | Waterproofing Coating |
Perma DPS is a deep penetrating sealer for bricks, areated blocks, hollow blocks, clay tiles etc. it seals the treated surface and makes it waterproof. It is and ideal treatment to the un plaster brick work behind the composit panel facades.
Myk Arment Aquaarm Multicrete
Request Callback
₹ 140 / Litre Get Latest Price
Product Brochure
| Brand | MYK Arment |
| Available Colour | White |
| Color | Green |
| Packaging Size | 20 L |
| Packaging Type | Drum |
| Usage | Waterproofing of small roof terraces, chajjas, parapets & balconies, Sunken portions of toilets |
| Paint Base Type | Water Based |
| Form Of Paint | Liquid |
| Coverage | 1Kg/Sqm |
Minimum order quantity: 100 Litre
It is acrylic emulsion based, used as a cement modifier when applied, provides good bond with masonry/ cement and thus improves the tensile and flexural strength properties of the mortar.
Cico Tapecrete P151 Waterproof Coatings
Request Callback
₹ 130 / Kg Get Latest Price
Product Brochure
| Color | White |
| Type | Acrylic |
| Packaging Size | 20L, 50L, 200L |
| Usage/Application | Roofs |
| Brand | CICO |
| Packaging Type | Drum |
| Form | Liquid |
Minimum order quantity: 200 Kg
CICO TAPECRETE P151, popularly known as TAPECRETE, is an acrylic based Polymer Modified Cementations Flexible Composite coating system. TAPECRETE, in conjunction with cement, makes-up for the shortcomings of plain cement, particularly its poor adhesion properties, low impact strength, low flexural strength and thin section fragility. TAPECRETE Polymer enhances qualities of cement slurry/ mortar/concrete making them excellent choices for use in new constructions as well as for renovation work.
20Kg Hydroproof Xtra
Request Callback
₹ 180 / Litre Get Latest Price
Product Brochure
| Packaging Size | 20kg |
| Category | Acrylic Based Polymer Coating, Waterproofing Coating, Cementitious Waterproofing |
| Coverage | Priming coat - 16-17m2 / L. Topcoat - 4.5 - 5.0m2 / L / coat |
| Grade Standard | Chemical Grade |
| Types | Cementitious Waterproofing, Waterproofing Coating, Acrylic Based Polymer Coating |
| Packaging Type | Drum |
| Brand | Fosroc |
| Physical State | Liquid |
| Form of Chemicals | Liquid |
| Color | White Crystal |
Minimum order quantity: 500 Litre
Hydroproof Xtra
Single component acrylic polymer for cementbased waterproof composite coatingmembraneUsesProvides an effective and economical method of waterproofi ngto concrete and masonry surfaces, by mixing with cement andapplication by brush.Advantages Non - toxic, non-fl ammable and user friendly Provides a tough, impermeable waterproof membrane Can be applied by brush, on horizontal and vertical surfaces Excellent adhesion to concrete and masonry surfaces Protects concrete and mortar from natural elements suchas wind, rain, sunlight Breathable - allows inside water vapour to escapeDescriptionHydroproof Xtra is formulated to be mixed with cement on siteor simply brush applied over concrete or masonry surfaces toprovide an effective waterproof membrane.
28Kg Dr Fixit 113 Fastflex
Request Callback
Get Latest Price
Product Brochure
| Brand | Dr Fixit |
| Usage/Application | Swimming pools,water tanks and reservoirs.,} Bathrooms,toilets,sunken portions,balconies |
| Packaging Size | 48 Kg |
| Category | Cementitious Waterproofing |
| Color | Grey |
| Type | Two Component Cemetious Coating |
| Coverage | Approximately 0.5 - 0.55 m2 in 2 coats at 1.2 - 1.5 mm DFT |
| Material | Two Component |
| Features | Water proofing - Tough film buildup provides excellent waterproofing. Elasticity - Highly elastic |
| Form Of Chemical | 2 Component |
A two component cementitious coating, composed of high quality cement, properly selected & graded fillers, additives and liquid polymer. It is suitable for achieving waterproofing for the water retaining structures such as swimming pools, water tanks, reservoirs, other wet areas, etc, because it provides strong bonding, good waterproofing and excellent resistant to hydrostatic water pressure by forming highly elastic seamless coating over the applied concrete or masonry surfaces.
Hydroproof Xtra Water Proofing Chemical
Request Callback
Get Latest Price
Fosroc Hydroproof Xtra is a single-component, acrylic polymer-based waterproofing chemical used to create waterproof coatings on concrete and masonry surfaces. It can be mixed with cement for application, or applied directly with a brush, providing an effective and economical waterproofing solution.
Synroof High Build
Request Callback
₹ 225 / Kg Get Latest Price
Product Brochure
| Service Location/City | Pune |
| Usage/Application | Terrece and Roof waterproofing |
| Packaging Size | 20kg |
| Type | Waterproofing |
| Color | White |
| We Also Installs | Waterproofing System |
| Coverage | 1.8 - 2.0 kg/sqm |
Minimum order quantity: 1 Kg
Synroof Hi Bulid Polymer
Kemperol 1K
Request Callback
₹ 455 / Kg Get Latest Price
Product Brochure
| Brand | Kemperol |
Minimum order quantity: 5 Kg
KEMPEROL 1 K OF KEMPER SYSTEM GERMANY by using Kemperol 1 K (Single component PU Solvent free, highly flexible, UV resistant system
Dr Fixit 301 Waterproofing Chemical
Request Callback
₹ 4250 / Litre Get Latest Price
| Packaging Size | 50 kg |
| Form Of Chemical | Liquid |
| Usage/Application | Waterproofing |
| Brand | Dr Fixit |
| Coverage | 500 sq ft |
| Purity | 100% |
Fosroc Brushbond Rfx Waterproofing Chemical
Request Callback
Get Latest Price
Product Brochure
| Brand | Fosroc |
| Usage/Application | High performance elastomeric cementitious waterproof coating |
| Packaging Size | 20kg |
| Category | Waterproofing Coating |
| Color | Grey |
| Coverage | 150 sft/pack |
| Type | Water Proofing Compounds |
| Material | 2 Component Powder + Liquid |
| Shelf Life | 12 Month |
| Form Of Chemical | 2 Component |
High performance elastomeric cementitiouswaterproof coating
UsesBrushbond RFX is an high performance elastomeric cementitiouscoating used for waterproofi ng and to protect atmosphericallyexposed reinforced concrete structures from attack by acidgases, chloride ions, oxygen & water.Brushbond RFX is suitable for all types of structures includingthose in coastal environments.The product can be used on concrete, brick and blockwork substratesand is equally suitable for new and existing structures.The product is designed to reface and even out variations inconcrete and masonry surfaces and bridge shrinkage cracks.It provides a seamless, fl exible waterproof coating suitable forwater tanks, reservoirs, drainage culverts basements and roofs.The product provides a tough durable water resistant coatingwhich can withstand light pedestrian traffi c and also has excellentweather resistance for exterior applications.
Advantages Ex cel le nt b ar r ie r to carbo n dioxide, chlor ideand sulphate ions Allows water vapour to escape from the structure Waterproof-suitable for water retaining structures High resistance to the effect of long-term weathering,durable in all climate conditions including UV attack Non toxic - ideal for potable water tanks Flexible, with thermal expansion similar to concrete Excellent bond to concrete and masonry Good crack accommodation capacity Minimum surface preparation needed and low labourcosts.
UsesBrushbond RFX is an high performance elastomeric cementitiouscoating used for waterproofi ng and to protect atmosphericallyexposed reinforced concrete structures from attack by acidgases, chloride ions, oxygen & water.Brushbond RFX is suitable for all types of structures includingthose in coastal environments.The product can be used on concrete, brick and blockwork substratesand is equally suitable for new and existing structures.The product is designed to reface and even out variations inconcrete and masonry surfaces and bridge shrinkage cracks.It provides a seamless, fl exible waterproof coating suitable forwater tanks, reservoirs, drainage culverts basements and roofs.The product provides a tough durable water resistant coatingwhich can withstand light pedestrian traffi c and also has excellentweather resistance for exterior applications.
Advantages Ex cel le nt b ar r ie r to carbo n dioxide, chlor ideand sulphate ions Allows water vapour to escape from the structure Waterproof-suitable for water retaining structures High resistance to the effect of long-term weathering,durable in all climate conditions including UV attack Non toxic - ideal for potable water tanks Flexible, with thermal expansion similar to concrete Excellent bond to concrete and masonry Good crack accommodation capacity Minimum surface preparation needed and low labourcosts.
Zycoprime Plus Waterproof Chemical
Request Callback
₹ 210 / Litre Get Latest Price
Product Brochure
| Usage/Application | Bonding Agent |
| Packaging Size | 20kg |
| Category | Waterproofing Coating |
| Coverage | As per surface |
| Type | Waterproofing |
| Color | White Crystal |
| Features | Waterproofing Membrane : Roof terraces,sunken portion of toilets & bathrooms,chhajas,balcony,etc |
| Shelf Life | 4 years |
Minimum order quantity: 1 Litre
ZycoPrime+ is an Acylic co-polymer emulsion, supplied as a ready to use bonding agent inliquid consistency. It is a versatile product and can be used as a cement modifier for repair ofspalled concrete - slabs, balconies, beams, columns, floors & waterproofing of toilets,bathrooms and terraces.
Starbond Stracrte Prime Plus
Request Callback
Get Latest Price
Starbond Starcrete Prime Plus is an aqueous acrylic co-polymer dispersion designed to improve the performance of Portland cement-based mortars and other construction materials. It enhances physical strength, adhesion to various surfaces, durability, and reduces cracking.
Auracast 405, Fosroc Reebol Emulsion Xtra
Basf Masterpel 777 Concrete Admixture
Conplast Sp430 Srv Concrete Admixture
Fosroc Renderoc FC Polymer Modified Fairing Mortar
Nitcote Wall Guard Acrylic Waterproof Coating
Nitocote AP 35 Cementitious Coating
Fosroc Cebex 100
Fosroc Conbextra Gp2 25kg Non Shrink Grout
Nitocote EP405 Epoxy Base Resin
Nitocote EP140 Epoxy Coating Resin
Crystalline Waterproofing Coatings
Fosroc Conplast Sp430 Srv Superplasticizer
STARPROOF HR 900
Starproof Wf Ac 601
Fosroc Nitotile GTA Tile Adhesives
Sikagrout 214 Cement
Sika Rain Tite
X
Product Videos
Mcon Super Hack (20kg)
Get QuoteBerger Pu Roof Coat
Get QuoteDr Fixit Coal Tar Epoxy Coatings
Get QuoteContact Us
Mr. Pramod Jadhav (Owner)
Sheetal Enterprises
Flat No 14 G No 222, 4th Floor, Amardevi Devlopers, Somatane
Pune - 412106, Maharashtra, India
Send Email