Sheetal Enterprises

Conbextra® GP2
Free flow, high strength, non-shrink, cementitious
precision grout
Uses
Conbextra GP2 is used for precision grouting where it is
essential to withstand static and dynamic loads. Typical
applications would be the grouting of base plates of turbines,
compressors, boiler feed pumps etc., It can also be used for
anchoring a wide range of fixings. These include masts,
anchor bolts and fence posts.
Advantages
 Gaseous expansion system compensates for shrinkage
and settlement in the plastic state
 No metallic iron content to cause staining
 Pre-packed material overcomes onsite batching variations
 Develops high early strength without the use of chlorides
 High ultimate strength ensure the durability of the hardened
grout
 Free flow ensures high level of contact with load bearing
area
Description
Conbextra GP2 is supplied as a ready to use dry powder. The
addition of a controlled amount of clean water produces a free
flowing, non-shrink grout for gap thicknesses up to 100mm.
Conbextra GP2 is a blend of Portland cement, graded fillers
and chemical additives which impart controlled expansion in
the plastic state whilst minimising water demand. The low
water demand ensures high early strength. The graded fillers
are designed to assist uniform mixing and produce a consistent
 
grout.

Leveraging the skills of our qualified team of professionals, we are instrumental in offering a wide range of Fosroc Cebex 100.
Main uses:
Sufficient restrained expansion is developed to ensure a high degree of inter facial contact.

Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout.

Reduced water/cement ratio in the grout mix ensures low permeability and long term durability in service.

Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.

No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.

Composition allows high early strength development in grouts, without the use of chlorides.

Advantages:

Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout.

Reduced water/cement ratio in the grout mix ensures low permeability and long term durability in service.

Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy.

No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.

Composition allows high early strength development in grouts, without the use of chlorides.